If you are getting Switch error code 2110, you are likely in the middle of a gaming session only to be interrupted by a sudden, frustrating connection failure. Before diving into the technical solution, it is worth noting that the correct spelling is "getting," which comes from the verb "get"—a common point of confusion when searching for this specific error online. However, focusing on the syntax is secondary to the immediate goal: restoring your console's internet connectivity so you can return to your gameplay without further interruptions.
Error code 2110 on the Nintendo Switch is generally categorized as a networking issue.
It typically occurs when the console is unable to resolve a hostname or cannot reach the DNS server provided by your internet connection.
In simpler terms, your Switch is trying to talk to the Nintendo servers, but the path is blocked, or the address it is looking for is incorrect.
Because this is almost always a configuration or signal issue rather than a permanent hardware failure, it is usually quite simple to resolve with a few targeted troubleshooting steps.
Understanding the Root Cause of Error 2110
Before you begin changing settings, it helps to understand why the error appears.
Most users encounter this when their network settings are misconfigured, or their router is temporarily struggling to assign an IP address to the console.
This often happens after a firmware update or a sudden change in network environment.
Because the error relates to DNS (Domain Name System) settings, the quickest fix usually involves either refreshing the connection or manually overriding the default DNS settings provided by your Internet Service Provider (ISP).
Step-by-Step Troubleshooting for Error 2110
The first and most effective step is a complete power cycle of both your Nintendo Switch and your networking equipment.
Start by holding the Power button on your Switch for three seconds and selecting "Power Options" followed by "Restart." While the console reboots, unplug your router and modem from the power source.
Wait at least 30 seconds before plugging them back in.
Once the lights on your router stabilize, turn your Switch back on and attempt to reconnect.
This often resolves minor handshaking issues between the console and the gateway.
If the restart did not work, you should check your DNS settings.
Sometimes, the DNS servers assigned by your ISP are unreliable.
Navigate to System Settings on your Switch, select Internet, and then Internet Settings.
Choose your current network, select Change Settings, and navigate to DNS Settings.
Switch it from "Automatic" to "Manual." Try using Google’s public DNS servers: set the Primary DNS to 8.8.8.8 and the Secondary DNS to 8.8.4.4.
This is a highly effective way to bypass ISP-related resolution errors.
Advanced Solutions and When to Contact Support
If you are still getting the same error after manually setting your DNS, the issue might lie in the physical connection or the network environment itself.
If you are using a Wi-Fi connection, ensure your Switch is close to the router, as low signal strength can sometimes manifest as a DNS timeout, triggering the 2110 code.
If possible, test your console on a mobile hotspot; if the connection works on the hotspot but not your home network, the issue is definitively with your router's firewall or settings.
Finally, check if your router has a strict firewall enabled that might be blocking Nintendo's traffic.
Some routers categorize game console traffic as "unknown" or "suspicious," especially if you have enabled advanced security features or parental controls.
If you have exhausted all these steps and are still facing the issue, it may be time to contact your ISP to ensure they are not experiencing an outage in your area or blocking traffic from Nintendo’s domains.
Frequently Asked Questions (FAQ)
Does error code 2110 mean my Nintendo Switch is broken?
No, error code 2110 is a software-based networking error related to DNS or connection timeouts.
It does not indicate that your hardware is damaged.
Why does changing DNS settings fix the error?
Changing your DNS to a public provider like Google (8.8.8.8) helps your console bypass unreliable ISP servers that may be failing to resolve Nintendo's network hostnames.
Can I use a mobile hotspot to test if the error is my home network?
Yes, connecting to a mobile hotspot is an excellent diagnostic step.
If the error disappears, the problem lies within your home router or ISP settings.
How often should I restart my router to prevent connection errors?
A monthly power cycle of your router is a good practice to clear its cache and prevent many types of connection errors, including error 2110.
Written by: Kevin Phillips
Read also: Fixing GeForce Now Error Code 0xc2720018: The Ultimate Troubleshooting Guide
